Ecomix Whole House Water Softener & Iron Filter System 1.5
The Ecomix 1.5 whole house system is designed for problem water where more than just hardness needs to be addressed. Ecomix is a 5-component composite media that combines inert resin, FerroSorb, HumiSorb, cation exchange resin, and quartz sand to treat multiple water issues in one system. It is designed to reduce hardness, ferrous/ferric/organic/colloidal iron, manganese, tannins, and ammonium, making it a practical option for many private well applications.
Unlike a standard softener media, Ecomix self-classifies into a 5-layer bed during regeneration and is regenerated like a regular softener using backwash, brine, rinse, and fill. The manufacturer notes that Ecomix performs best when raw water is fed directly to the unit and advises not using oxidative pre-treatment ahead of the system.
For this 1054 vessel size, Ecomix specifies 1.5 bags of media, an approximate 17,000 grain system capacity, 5.7 GPM service flow, 8.4 lbs of salt per regeneration, and a 2.6 GPM backwash flow rate.
Key Features
- All-in-one treatment media for hardness, iron, manganese, tannins, and ammonium
- Uses a 10" x 54" mineral tank
- Requires 1.5 bags of Ecomix media
- Approximate service flow: 5.7 GPM
- Approximate system capacity: 17,000 grains
- Approximate salt per regeneration: 8.4 lbs
- Approximate backwash flow rate: 2.6 GPM
- Regenerates like a standard softener
- Compact footprint compared to multiple separate treatment units
- Media Lifespan is 3-5 years
- Built with a metered Clack WS1 CC valve
Influent Water Limits
This system should only be used where raw water is within Ecomix’s published operating limits:
- Hardness: up to 45 gpg
- Iron: up to 15 ppm
- Manganese: up to 3 ppm
- Tannins: up to 5 ppm
- Ammonium: up to 4 ppm
Suggested Installation Notes
- Input the raw water hardness into the control valve settings
- Regenerate the system after installation
- Recommended feed pressure is 40–60 psi
- Drain line should not exceed 8 ft
- A sediment pre-filter is recommended; for high turbidity or iron above 10 ppm
Original: $2,099.00
-65%$2,099.00
$734.65More Images
Ecomix Whole House Water Softener & Iron Filter System 1.5
The Ecomix 1.5 whole house system is designed for problem water where more than just hardness needs to be addressed. Ecomix is a 5-component composite media that combines inert resin, FerroSorb, HumiSorb, cation exchange resin, and quartz sand to treat multiple water issues in one system. It is designed to reduce hardness, ferrous/ferric/organic/colloidal iron, manganese, tannins, and ammonium, making it a practical option for many private well applications.
Unlike a standard softener media, Ecomix self-classifies into a 5-layer bed during regeneration and is regenerated like a regular softener using backwash, brine, rinse, and fill. The manufacturer notes that Ecomix performs best when raw water is fed directly to the unit and advises not using oxidative pre-treatment ahead of the system.
For this 1054 vessel size, Ecomix specifies 1.5 bags of media, an approximate 17,000 grain system capacity, 5.7 GPM service flow, 8.4 lbs of salt per regeneration, and a 2.6 GPM backwash flow rate.
Key Features
- All-in-one treatment media for hardness, iron, manganese, tannins, and ammonium
- Uses a 10" x 54" mineral tank
- Requires 1.5 bags of Ecomix media
- Approximate service flow: 5.7 GPM
- Approximate system capacity: 17,000 grains
- Approximate salt per regeneration: 8.4 lbs
- Approximate backwash flow rate: 2.6 GPM
- Regenerates like a standard softener
- Compact footprint compared to multiple separate treatment units
- Media Lifespan is 3-5 years
- Built with a metered Clack WS1 CC valve
Influent Water Limits
This system should only be used where raw water is within Ecomix’s published operating limits:
- Hardness: up to 45 gpg
- Iron: up to 15 ppm
- Manganese: up to 3 ppm
- Tannins: up to 5 ppm
- Ammonium: up to 4 ppm
Suggested Installation Notes
- Input the raw water hardness into the control valve settings
- Regenerate the system after installation
- Recommended feed pressure is 40–60 psi
- Drain line should not exceed 8 ft
- A sediment pre-filter is recommended; for high turbidity or iron above 10 ppm
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Ecomix 1.5 whole house system is designed for problem water where more than just hardness needs to be addressed. Ecomix is a 5-component composite media that combines inert resin, FerroSorb, HumiSorb, cation exchange resin, and quartz sand to treat multiple water issues in one system. It is designed to reduce hardness, ferrous/ferric/organic/colloidal iron, manganese, tannins, and ammonium, making it a practical option for many private well applications.
Unlike a standard softener media, Ecomix self-classifies into a 5-layer bed during regeneration and is regenerated like a regular softener using backwash, brine, rinse, and fill. The manufacturer notes that Ecomix performs best when raw water is fed directly to the unit and advises not using oxidative pre-treatment ahead of the system.
For this 1054 vessel size, Ecomix specifies 1.5 bags of media, an approximate 17,000 grain system capacity, 5.7 GPM service flow, 8.4 lbs of salt per regeneration, and a 2.6 GPM backwash flow rate.
Key Features
- All-in-one treatment media for hardness, iron, manganese, tannins, and ammonium
- Uses a 10" x 54" mineral tank
- Requires 1.5 bags of Ecomix media
- Approximate service flow: 5.7 GPM
- Approximate system capacity: 17,000 grains
- Approximate salt per regeneration: 8.4 lbs
- Approximate backwash flow rate: 2.6 GPM
- Regenerates like a standard softener
- Compact footprint compared to multiple separate treatment units
- Media Lifespan is 3-5 years
- Built with a metered Clack WS1 CC valve
Influent Water Limits
This system should only be used where raw water is within Ecomix’s published operating limits:
- Hardness: up to 45 gpg
- Iron: up to 15 ppm
- Manganese: up to 3 ppm
- Tannins: up to 5 ppm
- Ammonium: up to 4 ppm
Suggested Installation Notes
- Input the raw water hardness into the control valve settings
- Regenerate the system after installation
- Recommended feed pressure is 40–60 psi
- Drain line should not exceed 8 ft
- A sediment pre-filter is recommended; for high turbidity or iron above 10 ppm
